ROBO-8920VG2 Mодуль PICMG 1.2 (ePCI-X) на базе 2-x процессоров Xeon (VGA, 2 LAN, 4 IDE, 4 USB, 2 Com)

ROBO-8820VG2 Dual Intel® Xeon® processor based PICMG 1.2 (ePCI-X) SHB with VGA and Dual Gigabit Ethernet

Модуль снят с производства

FEATURES
- Intel® E7501 chipset for optimizing system bus, memory and I/O bandwidth to deliver
enhanced performance and scalability
- Dual PICMG 1.2 compliant PCI-X bus for higher expandability
- Intel® 82546 dual port Gigabit Ethernet controller for the best network throughput
- Reliable design for high processing performance with dual Intel® Xeon® processor
- High speed DDR ECC registered SDRAM memory for data sensitive application
- ATI Rage XL graphics chip with 8MB memory provides the best 2D and 3D performance in server-level class
- Rich expansion capability through proprietary HL expansion connector

GENERAL

Processor CPU & Package: Intel® Xeon®/ LV Xeon® processor (Single or Dual
processor) in 604-pin & 603-pin PPGA package
FSB: 533/400MHz

Chipset/Core Logic Intel® E7501 and ICH3-S
System Memory - Up to 4GB DDR 266/200 SDRAM on two 184-pin DIMM sockets
- Support ECC, registered

BIOS Award BIOS

Storage Devices
Support four EIDE devices with Ultra DMA 100/66/33

Solid State Disk
- One Type II CF socket
- On secondary EIDE channel
- Bootable for no drives on primary channel

Watchdog Timer Programmable via software from 0.5 sec. to 254.5 min.

Expansion Interface
- Two independent PCI-X buses
- Proprietary Hub Link expansion connector for up to 4 PCI-X buses expansion

I/O
MIO Two serial (selectable RS232/422/485 x1), one parallel, one FDD channel
IrDA N/A

Ethernet
- Support teaming function
- Intel® 82546 PCI-X dual port Gigabit Ethernet controller
- Two RJ-45 connectors with two LED indicators for LAN access and link status

USB Four USB 1.1 ports
Keyboard & Mouse One 6-pin header for keyboard and mouse through PA-I1KUC

DISPLAY
Graphic Controller ATI Rage XL PCI VGA graphics controller
Graphic Memory 8MB display memory
Display Interface Display resolution up to 1600 x 1200 @85Hz refresh

Hardware Monitoring System monitor (fan, temperature, voltage)

Power Requirement Typical: +5V@3.1A; +12V(CPU)@6.5A; +12V(System)@1.2A; +3.3V@2.9A

Dimension Dimension : 338.5(L) x 122(W) mm; 13.33"(L) x 4.8" (W)

PCB: 12-layer

Environment
Operating Temperature: 0 to 50oC
Storage Temperature: -20 to 75oC
Relative Humidity: 5% to 90%, non-condensing
MTBF 142,578 hrs