ROBO-8921VG2R Mодуль PICMG 1.3 на базе 2-x процессоров Dual/Quad Core Xeon (VGA, 2 LAN, 6 SATA 300, 10 USB, 2 Com)

Производитель: 
_Portwell, Inc. (Китай)

Недоступно для заказа

Dual Xeon® LV processor based PICMG 1.3 SHB with VGA and Dual Gigabit Ethernet

ROBO-8921VG2R Mодуль PICMG 1.3 на базе 2-x процессоров Dual/Quad Core Xeon  (VGA, 2 LAN, 6 SATA 300, 10 USB, 2 Com)

FEATURES
- ROBO-8921 offers flexible 1333/1066 MHz selection of Intel® Dual/Quad CoreTM Xeon® processors with LGA771 package
- Flexible design of dual PCI Express x8 could be aggregated as one PCI Express x16 for Graphic card
- Rich & powerful I/O expansion covers dual PCI Express x8, one PCI Express x4 and four PCI devices
- Up to 32GB, ECC registered memory assured the computer reliability and benefited the data swapping process
- Relative high performance graphic engine, XGI Z11 provides solid 2D for server grade market
- Dual PCI Express x4 based Gigabit Ethernet supports IPv4, IPv6 offloading, VLAN, Wake-On-LAN functions

GENERAL

Processor CPU & Package: Dual/Quad CoreTM Intel® Xeon® processor (single or dualprocessor) in LGA-771 package
FSB: 1333/1066MHz

Chipset/Core Logic Intel® 5100 and ICH9R

System Memory - Up to 32GB DDR2 533/667 SDRAM on four 240-pin DIMM sockets - Support ECC, registered

BIOS AMI BIOS

Storage Devices EIDE: N/A
SATA: Support Six SATA 300 drives (dual SATA ports via Backplane)
Solid State Disk N/A

I/O
MIO Two serial (RS232 x1, selectable RS232/485 x1), one parallel, one FDD
channel
IrDA N/A
Ethernet PCI Express x4 interface based Intel® 82575 dual Gigabit Ethernet controller
Audio N/A
USB Ten USB 2.0 ports (Four through backplane)
Keyboard & Mouse Two USB 2.0 ports on bracket dedicated to keyboard & mouse

DISPLAY
Graphic Controller XGI Z11
Graphic Memory 32MB DDR2 Memory
Display Interface Support CRT and optional second CRT or DVI display interfaces

Watchdog Timer Programmable via software from 0.5 sec. to 254.5 min.

Expansion Interface - One PCI Express x8
- Three PCI Express x4
- Four PCI devices

Hardware Monitoring System monitor (fan, temperature, voltage)

Power Requirement Typical: +5V@7.01A; +12V@3.74A

Dimension Dimension : 338.6(L) x 126.39(W) mm; 13.33"(L) x 4.98" (W)

PCB: 12-layer

Environment
Operating Temperature: 0 to 60oC
Storage Temperature: -20 to 80oC
Relative Humidity: 5% to 90%, non-condensing
MTBF 71,830 hrs