SG901-1071 - миниатюрный модуль Wi-Fi (802.11b/g/n, 2.4 Ггц, до 72 Мбит/с)
Недоступно для заказа
Overview
The SG901-1071 CSR-Indigo module is a single chip based 802.11b/g/n WLAN radio for embedded, low-power and extremely small form factor mobile applications. The product conforms to the IEEE 802.11b, g, and n protocols operating in the 2.45GHz ISM frequency band supporting 802.11n modulations up to 72.2Mbps, all OFDM modulations and all mandatory 802.11b modulations.
The SG901-1049 Indigo is a fully integrated wireless radio including RF Synthesizer/VCO, high-speed data converters, digital baseband processor, onboard MAC and PHY processors, power management, Power Amplifier and LNA.
An on-board EEPROM stores calibration data for alignment-free integration.
Bluetooth integration features of the radio are made available.
An on-board crystal and filter simplify system integration. Just add one 1.8V regulator, 3.3V Power, Antenna, and host communications. For maximum flexibility, the SG901-1071 can optionally accept a wide range of external reference clock frequencies.
Host interface
Digital interfaces include both SDIO or SPI.
Software Support
This module is supported by a driver and Wi-Fi stack this is availble 100% source code for free. This code base is portable and the source code enables direct customer support.
Features
• RoHs Compliant
• Fully integrated 802.11 Solution
• Extremely small footprint (9.5x12mm)
• Ultra Low Current consumption
• Fully compliant with the IEEE 802.11b, g, and n WLAN standards
• Support for 802.11n modulations up to 72.2Mbps, and all 802.11G
and mandatory 802.11b modulations
• Fully integrated 802.11b/g/n WLAN solution:
• Intelligent Power Control, Including 802.11 Power Save Mode
• Supports SPI interface
• Supports SDIO interface
Applications
• Personal Digital Assistants (PDA)
• Portable Computers
• Hand-held Data Transfer Devices
• Cameras
• Computer Peripherals
• Cable Replacement
• Cellular Phones
Ordering Information
Tape and Reel SG901-1071-TR
Bulk SG901-1071-BLK
Evaluation Kit Available
Part Number: SG923-0007
Overview
SG923-0007 Is an evaluation Kit used to simplify the rapid evaluation and software integration of the SG901-1071 Radio Module. The EVK allows for easy access to the SDIO interface via a standard SDIO hardware connector as well as a break out of each pin for debugging. The SDIO connector is designed to plug into processor development boards for rapid software testing.
The SG901-1080 Carrier board which hosts the SG901-1071 board also contains a debug connector which hosts the Blue Tooth coexistence control interface as well as a Debug SPI interface.
The evaluation kit can provide power to the module from a 3.3V SDIO socket or external input for instrumentation. A 2.4GHz antenna connection port as well as an optional external Bluetooth interface allow for complete system testing.
The Kit consists of a SG901-1071 soldered into a Carrier Board, Sagrad Part Number SG901-1080, Figure 1 and a SDIO/SPI Adapter Board, Sagrad Part number SG901-1042 depicted on Figure 2.
Most signals can also be used as general-purpose IO, and are available at standard 0.1” pitch headers for SPI applications and SDIO form factor for SDIO applications. An interface for external Bluetooth access is available in a 2mm pitch header.
Features
Easy to connect to SPI and SDIO header
Easy to use SDIO connector for common processor EVK.