Shinyei THT-NET. Устройство удаленного мониторинга температуры и влажности воздуха (подключение к IP-сети через Ethernet)

Product Specification SHINYEI KAISHA

Temperatture and Humiidiitty Transmiеtter
EtherNet*
Model THT-NET Series
The THT-NET Series can be linked digitally to any EtherNet* system (LAN) with the purpose of monitoring
temperature and humidity. SHINYEI “THT-NET” series is applicable for wide variety of application, such as
controlling small scale system of test chambers and large scale system of FA network.
Configuration Ethernet System

Feature
* Ethernet is a world wide interface, and you can link it with software and build up a network.
*.You can use your LAN cable (category 5) as is in your office/factory with THT-NET Series.
* You can save data collected in each THT-NET unit directly and monitor it.
* THT-NET unit can take in analog voltage Max.5V.of other measuring instruments such as
wind velocity (Optional)
* For monitoring Temp / Humidity in Food stuff facilities with HACCP mark.
* For clean room where the quality of commodities is subject to Temp / Humidity changes.

Connections

Characteristics

Model THT-NET
-20 to 70deg. C (Sensor)

Temperature
0 to 50deg. C (Electronics)
95%rh or less (Sensor)

Operating Range
Humidity
Less than 80%rh (Electronics)

Humidity Sensor Shinyei Humidity Sensor HPR-MQ
Temperature Sensor Thermistor

Humidity Measurement Accuracy +/-3 %rh (at 10 to 40deg. C, 30 to 90 %rh)
Temperature Measurement Accuracy +/-0.5deg. C (at 0 to 50deg. C)

Output From Temp. & Humidity probe
Temperature, Humidity, Dew point, Humidity Mixing Ratio, Absolute Humidity

Interface EtherNet * x 1 port

Power supply voltage 12 VDC +/-10%
Consumption About 500mA
Weight About 200g

Caution for use
! Avoid condensation and drenching.
! Avoid application of the Humidity Sensor in the salt, inorganic gases and organic gases.