NoiseKen ZAP-100. Автоматизированная система для испытаний автомобильной электроники электростатическими разрядами

Недоступно для заказа

Automated ESD Test System For Automotive Electronics
Model: ZAP-100
Test system specifically designed to apply

ESD pulses to interface cables or connector pins under test

The system consists of an ESS-2000 ESD simulator, motor driven 3-axis mechanism discharge application unit and PC for the overall control.

GENERAL

A recently development in ESD testing is an automated ESD test system for automotive electronics specifically designed to apply ESD pulses to interface cables or connector pins under test.

The standard system supports testing up to 100 pins (300 pins optional).

The Electrostatic Discharge Simulator Model: ESS-2000 in conjunction with a 3-axis motor-driven mechanism automatically applies discharges to the user-selected target pins and performs ESD testing in fully automated manner for all of the three discharge methods; air discharge, contact discharge and flashover tests.

This innovative system greatly contributes to time and labor savings in standardized ESD tests.

FEATURES

Standard system support testing for up to 100 pins
Fully automated teasing by using windows application software
User selectable test sequences
Safety interlocked door on the plastic protection cover
Contact discharge and two types of air discharge

SPECIFICATIONS

CONTROL UNIT Applicable pin number Standard 100
Applied voltage Contact discharge 0.2~30.0 kV
Air discharge: 5.0~30.0 kV
Start/ Stop/ Step voltages freely set
Polarity Positive or negative, Positive=>negative
Discharge interval 0.05~ 327s
No. of times of discharge 1~60000 times
Discharge mode Contact discharge, Air discharge 1, Air discharge 2

DISCHARGE UNITDrive system Cross angle robot by X-Y-X axis
Discharge pins arrangement 10 x 10
Pitch between pins 20mm / Secures withstand voltage by partitions
EUT connection Connectors provided to the discharge application unit for the EUT and associated controller or other device connection.
Test pin Provided to visibly check discharges.
Applicable ESD simulator and gun ESS-2000, TC-815R
Dimensions (W) 500 x (H) 500 x (D) 650 mm

PERSONAL COMPUTER/DRIVERCompatible machine IBM PC-AT compatible machine

Main memory: 64MB or more
Recommended CPU: Pentium® 200MH or higher
OS Microsoft® Windows® 95/ Windows® 98
Interface card GP-IB (PCI-BUS) Motor control (PCI-BUS)
Driver power supply AC100V, 300VA or below
Driver dimensioms Approx. (W) 280 x (H) 100 x (D) 280 mm